Product Description
Code meaning:
Internal structure and keep material changes
C: Symmetrical roller, stamped steel plate stop ring
CA: Symmetrical roller, one-piece brass cage
CTN1: symmetrical roller, nylon cage
E: Third generation design. Improve stress distribution; Provides longer service life than normal designs
Q: Bronze cage
MB: Symmetrical roller, two brass cages
EM: Symmetrical roller, special alloy integral cage.
K: tapered bore bearing, taper 1:12
K30: tapered bore bearing, taper 1:30
N: ring slot on the outer ring
There are three lubrication grooves and three lubrication holes on the outer ring
-CA: Fixed flange on the inner ring, guide ring at the center of the inner ring, machined brass cage
- CC: no flange inner ring, guide ring centered in the inner ring, two stamped steel cages
- CCJA: no flange inner ring, guide ring in the center of the outer ring raceway, two stamped steel cages
-MB: machined brass cage with inner ring centered
-MA: machined brass cage with outer ring centered
The role of angular contact ball bearings
Angular contact ball bearings are an important mechanical component, mainly used to support rotating mechanical parts, such as mechanical fans, electric motors, machine tools and automotive transmission systems. Their design allows them to withstand both radial and axial loads, which allows them to operate at higher rotational speeds. The contact Angle of angular contact ball bearings (that is, the Angle between the connection of the contact point of the ball and the raceway and the vertical line of the bearing axis) determines their ability to bear loads in the axial direction, and the greater the contact Angle, the higher the axial carrying capacity. The design of this bearing helps to reduce heat and friction during operation, so it has good stability under high-speed rotation. 23
In addition, angular contact ball bearings can also transmit torque, and in smaller cases to compensate for shafting moment of inertia, centrifugal force and impact load deformation. They are widely used in metallurgical equipment, mining machinery, engineering machinery, paper machinery, wind turbines, semiconductors, gear devices, pumps and compressors, injection molding machines, motorcycles and other fields.
Packaging & Shipping
Installation Instructions
The installation methods of angular contact ball bearings are mainly as follows:
1. Back-to-back installation (the wide end faces of the two bearings are opposite): This installation
The method is suitable for bearing large axial load and impact load. During installation, the contact Angle line of the bearing is diffused along the axis of rotation, which can increase the radial and axial bearing Angle rigidity, so that its deformation resistance can be better. However, it should be noted that due to the small internal clearance of the bearing, the stiffness of the bearing may be increased, thus affecting the life of the bearing.
2. Face to face installation (the narrow end faces of the two bearings are opposite): face is used
When the surface mode is installed, the contact Angle line of the bearing needs to converge in the direction of the rotation axis, and the ground bearing Angle is less rigid. Since the inner ring of the bearing extends out of the outer ring, when the outer ring of the bearing is pressed together, the original clearance of the outer ring is eliminated, and the preload of the bearing can be increased. This method is mainly suitable for bearing small axial load and impact load, and compared with the back-to-back installation of the bearing internal clearance is larger, can reduce the bearing stiffness, improve the bearing life. However, the automatic adjustment of the contact Angle for face to face installation is poor, so more accurate axial positioning and adjustment is required.
3. Installation in series arrangement (wide end faces of the two bearings in one direction):
When installed in series arrangement, the contact Angle line of the bearing is in the same direction and parallel, so that the two bearings can share the working load in the same direction. In order to ensure the axial stability of the installation, two pairs of bearings arranged in series must be installed at both ends of the shaft. In addition, three or more bearings can also be connected in series at the same support, but it can only withstand a single direction of axial load. This installation can improve bearing stiffness and load capacity, while reducing internal friction and heat generation, but requires more precise axial positioning and adjustment to prevent skew or wear.
4. Positioning installation: Fix a ring of angular contact ball bearing on the shaft
The other ring is fixed on the body, and this installation method is suitable for high-speed rotation. It can improve bearing stiffness and accuracy, reduce vibration and noise, but also requires precise positioning and adjustment to avoid wear and heat problems.
Our Advantages
Why choose us?
1. Quality Control In order to ensure the quality of our vehicles and other products, our QC personnel carry out strict supplier evaluation, incoming inspection, process inspection, final inspection and pre-delivery inspection. Most importantly, we listen to our customers and are always looking for ways to improve the quality of our products through continuous improvement.
2. We have established long-term and stable cooperative relations with major supermarkets, and can also provide ODM, OEM and agency services for customers all over the world.
3. We have spare bearings that can be delivered immediately to any place in the world. Our bearings are widely used in motor, fan, injection molding machine, mining, mechanical equipment, metallurgy, rolling, automobile, railway, steel, electric power, textile, packaging, petroleum, paper and other fields
4. We put customer satisfaction and product quality in the first place. We provide reliable guarantee and good after-sales service.
Product Parameters
Bearing type
FAQ
We are the manufacturer, warmly welcome you to visit our factory.
2. What types of bearings can you produce?
We produce standard and custom aligning roller bearings, tapered roller bearings and cylindrical roller bearings.
We also produce custom bearings designed for your special needs.
3. Are there other types of bearings available?
Yes, our company has long-term cooperative relations with many bearing manufacturers in China.
We can find most types of bearings you need.
4. What is the minimum order quantity?
There is no MOQ limit, SKG's service is 1. The more quantity, the better the service and price, the more advantages
Audited Supplier 
){kind=link}
){kind=link}