Product Parameters
Code meaning:
Internal structure and keep material changes
C: Symmetrical roller, stamped steel plate stop ring
CA: Symmetrical roller, one-piece brass cage
CTN1: symmetrical roller, nylon cage
E: Third generation design. Improve stress distribution; Provides longer service life than normal designs
Q: Bronze cage
MB: Symmetrical roller, two brass cages
EM: Symmetrical roller, special alloy integral cage.
K: tapered bore bearing, taper 1:12
K30: tapered bore bearing, taper 1:30
N: ring slot on the outer ring
There are three lubrication grooves and three lubrication holes on the outer ring
-CA: Fixed flange on the inner ring, guide ring at the center of the inner ring, machined brass cage
- CC: no flange inner ring, guide ring centered in the inner ring, two stamped steel cages
- CCJA: no flange inner ring, guide ring in the center of the outer ring raceway, two stamped steel cages
-MB: machined brass cage with inner ring centered
-MA: machined brass cage with outer ring centered
The self-aligning roller bearing has a double row of rollers, the outer ring has a common spherical raceway, the inner ring has two raceways and is tilted at an Angle relative to the bearing axis. This clever structure makes it have automatic aligning performance, so it is not easy to be affected by the Angle of shaft and bearing box seat on the error or shaft bending, and is suitable for installation error or shaft deflection caused by Angle error occasions. In addition to the radial load, the bearing can also bear the axial load of bidirectional action.
The inner hole of the aligning roller bearing has two kinds of cylindrical and conical, the taper of the conical cone hole is 1:30 and 1:12, the conical inner hole bearing is equipped with a tight sleeve or a discharge sleeve, and the conical inner hole aligning ball bearing can be conveniently and quickly assembled on the optical shaft or the ladder machine shaft.
Bearing type
Product Description
The main cage for aligning roller bearings: stamped steel plate reinforced cage (suffix E,). Stamped steel plate cage (suffix CC), glass fiber reinforced polyamide 66 cage (suffix TVPB), machined brass two-piece cage (suffix MB). Machined brass integral cage (suffix CA), stamped steel cage (suffix JPA) for vibration occasions. Vibrating brass cage (suffix EMA). The same structure, the code on the bearing may be different.
Main applications: paper making machinery, reducer, railway vehicle axle, rolling mill gear box bearing seat, rolling mill roller, crusher, vibrating screen, printing machinery, woodworking machinery, all kinds of industrial reducer, vertical aligning bearing with seat.
Aligning roller bearings have two types: cylindrical and conical. Aligning roller bearings are needed on mechanical equipment such as rolling mill gear box bearing seat, rolling mill roller and crusher.
Installation Instructions
Aligning bearing installation precautions
1. Before installing aligning bearings, you should carefully read the operating instructions of the equipment and select the corresponding aligning bearings according to the requirements of the equipment.
2. Before the installation of aligning bearings, the relevant positions of bearings and machines should be cleaned to remove debris and dirt.
3. When installing bearings, it is necessary to carefully adjust bearings according to the type of bearings and the requirements of machinery and equipment.
4. When installing aligning bearings, the installation of seals is very important, and the seals should be carefully checked to ensure that the seals will not be damaged and kept sealed
Sex.
5. After adjusting the bearing position, refuel the bearing. Before refueling, you should carefully read the refueling requirements on the equipment manual. In short, the correct installation of aligning bearings is an important guarantee to ensure the normal operation of the machine and equipment and extend the service life. You must master the installation methods and precautions carefully to ensure that no errors occur during the installation.
Our Advantages
Why choose us?
1. Quality Control In order to ensure the quality of our vehicles and other products, our QC personnel carry out strict supplier evaluation, incoming inspection, process inspection, final inspection and pre-delivery inspection. Most importantly, we listen to our customers and are always looking for ways to improve the quality of our products through continuous improvement.
2. We have established long-term and stable cooperative relations with major supermarkets, and can also provide ODM, OEM and agency services for customers all over the world.
3. We have spare bearings that can be delivered immediately to any place in the world. Our bearings are widely used in motor, fan, injection molding machine, mining, mechanical equipment, metallurgy, rolling, automobile, railway, steel, electric power, textile, packaging, petroleum, paper and other fields
4. We put customer satisfaction and product quality in the first place. We provide reliable guarantee and good after-sales service.
FAQ
We are the manufacturer, warmly welcome you to visit our factory.
1. What types of bearings can you produce?
We produce standard and custom aligning roller bearings, tapered roller bearings and cylindrical roller bearings.
We also produce custom bearings designed for your special needs.
2. Are there other types of bearings available?
Yes, our company has long-term cooperative relations with many bearing manufacturers in China.
We can find most types of bearings you need.
3. What is the minimum order quantity?
There is no MOQ limit, SKG's service is 1. The more quantity, the better the service and price, the more advantages
Audited Supplier 
){kind=link}