Product Description
Code meaning:
Internal structure and keep material changes
C: Symmetrical roller, stamped steel plate stop ring
CA: Symmetrical roller, one-piece brass cage
CTN1: symmetrical roller, nylon cage
E: Third generation design. Improve stress distribution; Provides longer service life than normal designs
Q: Bronze cage
MB: Symmetrical roller, two brass cages
EM: Symmetrical roller, special alloy integral cage.
K: tapered bore bearing, taper 1:12
K30: tapered bore bearing, taper 1:30
N: ring slot on the outer ring
There are three lubrication grooves and three lubrication holes on the outer ring
-CA: Fixed flange on the inner ring, guide ring at the center of the inner ring, machined brass cage
- CC: no flange inner ring, guide ring centered in the inner ring, two stamped steel cages
- CCJA: no flange inner ring, guide ring in the center of the outer ring raceway, two stamped steel cages
-MB: machined brass cage with inner ring centered
-MA: machined brass cage with outer ring centered
Product Parameters
The main function of thrust aligning roller bearing is to bear axial load, but also to bear a certain radial load.
The design of thrust aligning roller bearings allows them to withstand a certain amount of radial load as well as axial load. The spherical roller of these bearings has automatic aligning function and is not very sensitive to coaxiality and shaft deflection, which makes them excellent in the case of heavy loads and impact loads. In addition, the axial load capacity of thrust aligning roller bearings is very large, but the radial load shall not exceed 55% of the axial load. The use of such bearings usually requires oil lubrication to maintain its good performance and life.
Compared with thrust tapered roller bearings, thrust self-aligning roller bearings have greater load capacity and smaller relative slip, but lower limit speed. They are widely used in oil drilling RIGS, iron and steel machinery and other equipment, because these equipment need to withstand heavy loads and impact loads.
Packaging & Shipping
Installation Instructions
The installation method of thrust aligning roller: 1. When installing bearings, the bearing oil seal should be washed and then coated with clean high-quality lubricating oil.
2. When installing the bearing, it should be stressed evenly and cannot be hammered. If the interference is large, the bearing should be put into the mineral oil and heated to 90-100, and installed immediately.
3. The warehouse where bearings are stored should be clean and clean, and the relative humidity should not exceed 65%.
4. The stock bearing should be re-cleaned and oiled every other year, and the oil seal packaging should be kept in good condition.
5. When using bearings, there should be a good sealing and dust-proof device, and the working condition should be checked frequently.
Cylindrical roller bearing installation and use
1. The bearing is separate type, the user can adjust the clearance according to the need.
2. Bearings should be cleaned with gasoline or kerosene before use and kept well lubricated.
3. When the bearing is installed, the bearing should be pressed into the part, and it is strictly prohibited to knock.
4. The bearing storage place should be clean and ventilated, avoid moisture, and bearings that need long-term storage should be regularly rust-proof.
Detailed Photos
Bearing type
FAQ
We are the manufacturer, warmly welcome you to visit our factory.
2. What types of bearings can you produce?
We produce standard and custom aligning roller bearings, tapered roller bearings and cylindrical roller bearings.
We also produce custom bearings designed for your special needs.
3. Are there other types of bearings available?
Yes, our company has long-term cooperative relations with many bearing manufacturers in China.
We can find most types of bearings you need.
4. What is the minimum order quantity?
There is no MOQ limit, SKG's service is 1. The more quantity, the better the service and price, the more advantages
Audited Supplier 
){kind=link}
){kind=link}